Automatic reciprocator for powder coating/Powder painting
- Model
- COLO-2200
Item specifics
- Application
- Moving of automatic spray gun
- Voltage
- 110V/220V
- Stroke
- 1.5m, 1.8m, 2m , 2.5m
Review
Description
PLC Automatic Reciprocator for Powder Coating/Liquid Coating application
COLO-2200D PLC controlled powder coating reciprcator is newly designed by COLO 10 years experienced, applied in automatic line, it achieves perfect coating result. This reciprocator is electrically driven by belt through a frequency motor, controlled via PLC, giving much more gentle and precise motion comparing with normal reciprocators.
COLO Powder Coating Reciprocator Parameters
Rated voltage
|
AC220V~240V/50~60Hz
|
Rated power
|
0.75Kw
|
Speed | 0.08m/S-0.8m/S (adjustable) |
Stroke | 1.5m 1.8m 2m 2.5m |
Setting system
|
PLC with touch screen
|
Speed control method | Frequency conversion |
Required temperature
|
-10~50℃
|
Feature of the reciprocator
Could store 20 programs
Easy operation
Smooth and accurate running
Solid and maintenance free
Height or the stroke adjustale and customized
The programmable two-dimensional and three-dimensional intelligent controllable reciprocator is specially designed to improve the working efficiency and coating quality. The equipment can meet the highest requirement of coating quality, as the ideal product for improving surface finishing coating design.
If reciprocator position changed, Z-axis direction would move to Y-axis direction (moving with the production line)
The maximum speed of fore-and-aft direction in Z-axis is 10m/min (the data can be customized based on customer needs), adjustable within motion stroke range.there is a corresponding motion control according to the detection of part position signal.
Stroke can be adjusted in the controller;each part can be arbitrarily set in the travel range of the upper and lower limited position, while the speed can be set in a certain range. The speed of vertical direction in X-axis can be segment adjustable;
vertical speed up to 78m/min(the data can be customized based on customer needs).