COLO Manual equipment and guns
| Group | Hopper Powder coating Set |
|---|---|
| Min. Order | 1 piece |
| Terms of Payment | T/T, Western Union, paypal |
| Update Time | 2019-01-11 |
Item specifics
| Powder coating equipment | manual |
|---|---|
| Voltage: | 100-240 VAC |
| powder hopper | 50L |
| Power(W) | 50W |
| Dimension(L*W*H): | 56*52*69CM |
| Weight: | 55KGS |
Description
- Flat Parts, maximizes voltage for optimum transfer efficiency.
- Complex Parts, modifies voltage while holding current for optimum penetration and transfer efficiency.
- Recoat Parts, automatically adjusts voltage and current to the optimum level for recoating previously coated parts.
Electrical Data | |||
Nominal input voltage | 110V240VAC | ||
Frequency | 50-60Hz | ||
Connected load (without vibrator) | 40 VA | ||
Nominal output voltage (to the gun) | eff.10 V | ||
Nominal output current (to the gun) | max. 1.2 A | ||
Connection for rinsing function (valve) | 24 VDC max. 3 W | ||
Temperature range | 0°C - +40°C(+32°F - +104°F) | ||
Max. surface temperature | 85 °C (+185 °F) | ||
Approvals | II 3 D IP54 120 °C | ||
Pneumatical Data | |||
MAX.input pressure | 10bar | ||
MIN.input pressure | 6bar | ||
Input pressure (Dynamic based on pressure regulator setting) | 5.5 bar / 80 psi | ||
Max.water vapor content of the compressed air | 1.3g/Nm³ | ||
Max.oil vapor content of the compressed air | 0.1mg/Nm³ | ||
Max.compressed air consumption | 11Nm³/h | ||
Dimensions | |||
Width | 654mm | ||
Depth | 310mm | ||
Height | 428mm | ||
Weight | 16.5kg | ||
Processible Powders | |||
Plastic powder | yes | ||
Metallic powder | yes | ||
Enamel powder | no | ||
Related Products
