Automatic Powder coating systems for Steel Racks
Automatic powder Gun : CL-191A
Unprecedented precision control of current and voltage ensuring maximum efficiency and uniformity of coating.
Flat Parts maximizes voltage for optimum transfer efficiency.
Complex Parts, modifies voltage while holding current for optimum penetration and transfer efficiency.
Recoat Parts, automatically adjusts voltage and current to the optimum level for recoating previously coated parts. offers mobility and flexibility allowing operators to position the unit for easy access and adjustment.
New powder pump design employs the most effective angle to consistently deliver powder, resulting in optimized air consumption and less powder waste
The automatic Coating Systems Include Reciprocator and Carry Automatic Spray Gun
Automatic Reciprocator COLO-2000
With several electrostatic powder coating gun on the reciprocator Japan Mitsubishi Transducer & PLC controlled Four automatic spray gun rods(qty of the rods can be ordered)
Colour Orange and BluePowe supply：AC 220V 50HZ-60HZFrequency: Japanese Mitsubishi Power motor：0.75KWSweep speed：0～60m/min
Connection for rinsing function (valve) 24 VDC max. 3 W
Nominal output current (to the gun) max. 1.2 A
Nominal output voltage (to the gun) eff.10 V Automatic Spray Gun CL-191AConnected load (without vibrator) 40 VA Frequency 50-60Hz
Nominal input voltage 110V240VAC