Automatic Powder Application Systems for Racks
- Model
- CL-191s
Item specifics
- Powder coating equipment
- manual
- Voltage:
- 100-240 VAC
- powder hopper
- 50L
- Power(W)
- 50W
- Dimension(L*W*H):
- 56*52*69CM
- Weight:
- 35KGS
Review
Description
Automatic Powder coating systems for Steel Racks
Automatic powder Gun : CL-191A
Unprecedented precision control of current and voltage ensuring maximum efficiency and uniformity of coating.
Flat Parts maximizes voltage for optimum transfer efficiency.
Complex Parts, modifies voltage while holding current for optimum penetration and transfer efficiency.
Recoat Parts, automatically adjusts voltage and current to the optimum level for recoating previously coated parts. offers mobility and flexibility allowing operators to position the unit for easy access and adjustment.
New powder pump design employs the most effective angle to consistently deliver powder, resulting in optimized air consumption and less powder waste
The automatic Coating Systems Include Reciprocator and Carry Automatic Spray Gun
Automatic Reciprocator COLO-2000
Frequency: Japanese Mitsubishi
Power motor：0.75KW
Sweep speed：0～60m/min
With several electrostatic powder coating gun on the reciprocator Japan Mitsubishi Transducer & PLC controlled Four automatic spray gun rods(qty of the rods can be ordered)
Colour Orange and Blue
Powe supply：AC 220V 50HZ-60HZFrequency: Japanese Mitsubishi
Power motor：0.75KW
Sweep speed：0～60m/min
Acceleration: 1M/Second
Automatic Spray Gun CL-191A
Electrical Data
Nominal input voltage 110V240VAC
Frequency 50-60Hz
Connected load (without vibrator) 40 VA
Nominal output voltage (to the gun) eff.10 V
Nominal output current (to the gun) max. 1.2 A
Connection for rinsing function (valve) 24 VDC max. 3 W
Temperature range 0°C - +40°C(+32°F - +104°F)
Max. surface temperature 85 °C (+185 °F)
Approvals II 3 D IP54 120 °C
Cabinet of Control Unit can be make for 4, 8 and more.
